A broken bed frame can be a headache to fix, especially if you have no idea how it happened. This article will explain the two best ways to repair a broken bed frame.
The “how to fix a broken wood bed leg” is a guide that will show you how to fix a broken bed frame. The two best methods are the use of epoxy and jigsaw.
Moving or even rearranging your furniture may cause (bad) things to happen, and you might end up with a damaged bed frame. It’s inconvenient, and the last thing you need after a hard day. But don’t worry if I just described your present condition; I’ll show you how to mend a damaged bed frame today.
Believe me when I say that I understand the challenge. Your lovely bed, which complements your other furniture flawlessly, and even that odd rug your grandmother gave you, most likely cost you hundreds of dollars. Despite this, all it took was one bad move to shatter the frame. It’s heartbreaking, to be sure, but it occurs.
Unfortunately, whether you bought your bed from IKEA or a higher-end furniture retailer, improperly built beds aren’t uncommon these days. Manufacturers take shortcuts by employing the lowest materials available in order to get you to purchase more furniture. That’s exactly how the business operates (not that it justifies their choices).
But don’t despair; everything is not lost. The following instructions should teach you how to swiftly and easily repair a damaged bed frame.
To perform this project, you do not need to be a skilled craftsperson. Anyone can accomplish it if they follow my instructions.
Taking Care of the Problem
The disadvantage of a wooden bed frame is that it is susceptible to breaking. Because the wood used in most commercially accessible beds is of such low quality, cracks and splits are common.
However, in recent years, “prestigious” manufacturers have joined the trend of employing low-cost materials. As a result, the new “normal” is to spend upwards of $2000 every five years on a “high-end” bed.
Obviously, that’s a massive waste of money, particularly because repairing what’s wrong is so simple. So, here are two options for repairing the fissures.
Reinforcing the Bed Frame (Method 1)
You’ll only need a few extra pieces of lumber and screws for this method. A drill could also be useful; even if you don’t need it for this project, it’s a tool that everyone should own.
The following are the steps you must take:
1. Make a Clean Bed
To work comfortably, you must first remove the mattress as well as the box spring. However, keep the slats. The foundation is required so that the extra timber bars may be used to support it.
2. Cut the Wood
Depending on the extent of the damage, you may need to strengthen the whole frame with more timber. Even if just one bar has a crack, I’d recommend doing it. Besides, if you’re to the stage where you need to repair your frame, there’s definitely a lot more that has to be fixed.
It’s really simple to reinforce the frame; all you have to do is cut new pieces of timber to the proper length and install them on top of the broken pre-existing bars.
It’s critical to utilize timber with the same width as the original. However, if you can’t locate an exact match, the thickness may vary somewhat.
Measure and label the wood pieces before cutting them outdoors. For that, you’ll need a circular saw.
If you don’t have a circular saw and are on a limited budget, a hand saw will suffice. However, I would recommend just purchasing an electric saw since it would save you so much time and work. Furthermore, if you get a decent one, it will most likely be a one-time buy, so it is worthwhile.
3. Add the Wooden Pieces
Return inside and begin laying the bars on top of the cracked areas after you’ve cut them to the proper length.
It’s a good idea to strengthen the whole bed structure once again (including the slats). Save yourself the headache of having to do this again in the future by being clever.
Place the new center bar on top of the old one and secure it with a few screws. After you’ve installed everything, you’ll need to add extra screws to each bar.
Get larger screws and push them into the intersections where the middle bar overlaps the other slats after that’s done. For further support, choose a long enough screw that can penetrate through all of the wood. Longer screws are sandwiched between shorter ones.
Taking Care of a Side Bar Break
If the break is on one of the side bars that make up the frame’s perimeter, mend it the same way you would the center bar.
You’ll see that the new piece of wood isn’t going to remain straight; it’ll bend a little toward the frame’s inner. Don’t worry; it’ll be simple to draw it back after the first screws are in place.
Pull the bar straight after you’ve inserted roughly four screws (the number may vary depending on the bed).
Get three screws (for a queen-size bed) and simply start screwing them in (don’t go all the way). That way, you won’t have to grip the bar for lengthy periods of time. Plus, it’s more efficient than using one hand to pull and the other to place the screw and attempt to push it in.
Pull the bar back gradually, and you’ll find that you’re extending the whole frame. Because you already have the screws in position from the previous step, all you have to do now is drive them in. Try to get all three in there as fast as possible so you don’t lose strength.
The amount of screws will vary depending on the size of the bed.
4. Make it all beefy
In a year’s time, the last thing you want to do is go back to square one. That’s why, after you’ve got everything in position, you’ll want to secure everything you’ve fastened with extra screws.
This would guarantee that the new structure is sturdy enough to avoid collapsing. Don’t expect to be going to the shop for a new bed any time soon if you’ve done a nice job.
Dealing with Cracks (Method #2)
If you have a crack, wood glue may be used to repair it. Personally, I prefer the first way, but depending on your circumstances and available resources, the second may be a better fit. The steps are as follows:
1. Crack Preparation
Depending on the extent of the crack, you may need to use a screwdriver (or another similar-shaped device) to gently open it. The goal is to get rid of any splinters or other debris so that the glue can form a firmer connection. You can do it using an X-Acto knife, but remember to do it with utmost caution.
2. Apply the Glue
After you’ve prepared the crack, apply the adhesive throughout its whole length. It will be simpler to use a small-tip bottle since it gives greater accuracy. After that, use a putty knife to smooth off the adhesive.
If you don’t have a putty knife, you may spread the glue with an old X-Acto knife or even a hard piece of cardboard — anything that won’t leave a mess to clean.
Check to see whether the adhesive has penetrated the crack’s inside. The same procedure should be used for any cracks on the bed frame.
3. Attach Clamps
The next step would be to secure the frame using bar clamps all around it. Tighten them until you see the glue flowing out, but don’t overdo it; you don’t want to further harm the frame, particularly if it’s an old one.
C-clamps are another option, however they don’t have the same strength as bar clamps. At the end of the day, make do with what you’ve got – the goal of this endeavor isn’t to make you bankrupt!
Clamps should be left on all night. You must ensure that the adhesive is completely dried. While you wait, you should check the frame for any more cracks. Now is the moment to touch up any areas you may have overlooked.
4. Strengthen the Joint
You can reinforce the joint once the glue is completely dry. You’ll need to measure the crack’s length and add six to eight inches to it for this. Then, take a measurement of the bed frame’s breadth.
Cut a half-inch plywood strip once you have the dimensions. Again, if you’re on a low budget, don’t be too particular – practically any form of waste wood will suffice. Make sure it’s not rotted or broken, and that it’s close to the recommended size.
5. Make Holes
A 3/16-inch bit will be needed to pre-drill the plywood. Place the holes approximately two inches apart, but don’t be too concerned with the order. They are not required to line up in any way.
6. Use a glue gun and a screwdriver to attach the pieces together.
After you’ve finished preparing everything, apply glue to the plywood and gently place it over the crack. Drive one-inch screws into the pilot (pre-drilled) holes.
Allow the frame to dry for at least one night. Your bed will be ready to use after it has dried.
Disclaimer: When dealing with minimal damage, this procedure is typically appropriate. Stick to the first broken region or crack if there are more than two. After all, as you may have guessed, it takes longer.
Still, if you can’t locate bars that are the same width as yours (or any bars at all), and you just have plywood and glue, proceed with the second technique.
If you’ve been wondering how to repair a damaged bed frame without spending a lot of money on a new one, you now have two options.
If anything breaks, you don’t have to get rid of the bed. You can usually repair it yourself nine times out of 10. You’ll get the hang of it after you’ve completed a few jobs. You’ll be looking for new things to fix before you know it.
So don’t be afraid to take on problems because that’s what the large companies desire. You can do it, too, if I can. You don’t have to rely on merchants for everything if you know how to restore a damaged bed frame. Remember, everything is possible if you have enough desire!
There are two best methods to fix a broken bed frame. The first is to use a level and the second is to use a jackknife. Reference: how to fix a broken platform bed.
- how to fix broken bed slats
- how to fix a broken bed frame wood
- how to fix metal bed frame support
- how to fix a wooden bed frame rail
- bed repair